Missing audio during screen mirroring

INDIWORK – MAIN3 forums Support Missing audio during screen mirroring

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #7194
    Martin Clary
    Participant

    I have installed my [HD-LINK] IW03GF For Chevrolet into my 2013 Camaro. I also installed the APCAST (Wi-Fi receiver) for iPhone screen mirroring. I have a question:
    Issue: When playing a screen mirrored video from an iPhone, there is not any sound. Does the APCAST HDMI receiver not route video and sound through the HDMI into the HD-LINK unit? There may be a setting I am overlooking but I though I would ask here on the forum as others may benefit from the question as well.
    Thank you for your help!

    #7196
    INDIWORK
    Keymaster

    Hello dear.
    The APCAST HDMI receiver IN and OUT the video and audio through the HDMI. If you connect APCAST to a monitor with built-in speakers, you will hear sound. But, in the car, because the speaker is connected separately, so, the audio must also be connected separately.

    The AV cable has audio L and R wiring. please purchase a 3.5mm RCA Audio Cable, and connect it to the AV cable and AUX port.
    Thank you.

    • This reply was modified 11 months ago by INDIWORK.
    • This reply was modified 11 months ago by INDIWORK.
    • This reply was modified 11 months ago by INDIWORK.
    • This reply was modified 11 months ago by INDIWORK.
    • This reply was modified 11 months ago by INDIWORK.
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.