My Orders

Cart

0
  • No products in the cart.
Total:$0.00

Mercedes-Benz S-Class W222 AUX activation (With. OBD AUX Activator)

27 Mar Mercedes-Benz S-Class W222 AUX activation (With. OBD AUX Activator)

Posted at 15:58h in Mercedes-Benz by
73 Likes
Mercedes-Benz S-Class (W222) In The INDIWORK Garage * AUX Activation
Used the OBD type AUX Activator. AL-OBD-NTG5 (Only Mercedes NTG 5.0) 2015 ~ S-Class (W222) C-Class (W205 (8.4-inchs monitor) GLC-Class (X205 (8.4-inchs monitor)) V-Class (W447 (8.4-inchs monitor) ㆍApplies to Mercedes-Benz NTG5 vehicles without AUX. And, Enables hidden AUX audio functions. ㆍThere is no delay between the screen and audio. And, It provides better sound quality than FMT module or Bluetooth connection method. ㆍThere is no wiring damage in the vehicle when installing. And, easy to install and remove with OBD TYPE. ㆍWhen AUX function is activated, it can be linked with various devices.
After rebooting the commander, the AUX menu is created.
Then, remove the center console to connect the AUX pins (audio L, R. GND) behind genuine audio.
Connect the AUX pin to the original audio.
Make sure that the voice is output to the genuine speaker of the vehicle.
Tags:
, , , , ,
4 Comments
  • kevin
    Posted at 14:20h, 05 February Reply

    what are the wire pins for w222 aux input ground left and right

    • INDIWORK
      Posted at 10:49h, 07 February Reply

      Hello Dear, Kevin.
      Usually for C-class, the pins are disconnected and must be connected. But, for S-Class, the pins are already connected. So you need to remove the original pins and change them to the provided pins.
      Installation instructions are posted on the OBD-AUX product page.
      https://indiworkshop.com/shop/aux-generator/aux-activator-for-mercedes-benz-ntg5/
      And, activate the AUX menu by connecting the OBD Aux module.
      Thank you.

  • Johnny graur
    Posted at 06:26h, 06 January Reply

    Hi there I’ve got the W222 S class , I activated AUX menu by OBD, how do I connect to the AUX? It’s not connecting no music or sound
    Thank you

    • INDIWORK
      Posted at 14:26h, 06 January Reply

      Hello. after connecting the OBD AUX module, you need to connect AUX pin to the original audio connector. Please contact the place of purchase about the exact installation method. Thank you.

Post A Comment