2014 Mercedes-Benz E350 Android All-in-One Removal and Restoration to Factory System with Wireless CarPlay and Android Auto Installation

2014 Mercedes-Benz W212 E350 factory restoration display module and dashboard part removed and placed on workbench

2014 Mercedes-Benz E350 Android All-in-One Removal and Restoration to Factory System with Wireless CarPlay and Android Auto Installation

Interior of 2014 Mercedes-Benz W212 E350 showing dashboard after removal of 10.2-inch Android all-in-one and restoration to factory system

This is a 2014 W212 E350 that was brought in for the purpose of removing the 10.2-inch Android all-in-one and restoring the factory system.

As we have repeatedly mentioned, in terms of durability, aftermarket Android all-in-one units cannot match the durability of genuine Mercedes-Benz parts.

Today as well, an E350 vehicle that had an Android all-in-one installed three years ago was brought into the Indiwork Garage to restore it back to the original Mercedes-Benz genuine parts.

The main reasons for restoring a monitor-extended Android all-in-one back to the factory system are generally infinite monitor loading and durability issues with the Android all-in-one CPU.

Monitor black screen issue, inability to output factory screen due to LVDS chip failure, CAN BUS communication errors, and various other problems exist.

If two of these issues overlap, the Android all-in-one function and the monitor function necessary for driving cannot be properly performed, so only restoring the factory parts

is the most significant advantage, allowing semi-permanent use without A/S (after service).


2014 W212 E350

This is the W212, the white one that marked the heyday of the E-Class.

Mercedes equipped models from the W212 generation, ranging from the E250 to the E63 AMG, with German factory original navigation as a standard factory option.

The 2014 E350 that was brought in is also equipped with the German factory original navigation system, specifically the NTG4.5HU specification.

The factory command controller is very inconvenient to operate for navigation, and the crude map is unmatched by any other.

For reference, in the W212 NTG4.5HU specification, models like the E200 and E220 use a navigation monitor from Hyundai Mobis rather than an original Mercedes-Benz genuine part.

Please note that, as with the above vehicles, restoring to the original factory condition is almost impossible.

For the E200 and E220 NTG4.5 1CD HU models equipped with Hyundai Mobis navigation, if repair is needed due to a black screen issue on the monitor,

there is a separate solution that involves completely removing the internal PCB of the navigation monitor, replacing it with an LVDS PCB, and installing an interface.

2014 Mercedes-Benz W212 E350 showing removed Android all-in-one unit with original monitor frame and main unit

This is the genuine monitor cover and genuine 7-inch monitor procured in advance for factory restoration.

Although installation is done by procuring parts as needed after advance reservation and deposit receipt, these are used items and prices vary each time.

The condition of the parts is not uniform. Fortunately, in this supply batch, we were able to obtain parts in relatively good condition, and on the Indiework’s own NTG4.5 test bench,

normal operation was confirmed, and with the customer’s consent, the work proceeded smoothly.

* It is most advisable to bring the original monitor and monitor cover that were removed during the Android All-in-One installation.


INSTALLATION

2014 W212 Mercedes-Benz E350 Android all-in-one removed with original monitor placed on workbench

To restore to the original system, we first begin by removing the Android All-in-One unit.

The unique design of the W212 Mercedes-Benz features a monitor that is slightly recessed inward, but the 10.2-inch Android all-in-one unit protrudes outward beyond the cockpit’s outer line.

It is installed in this protruding structure, and since preferences vary individually regarding this aspect, further discussion may not be necessary.

However, there is a personal opinion that the original Mercedes cockpit design looks well balanced overall from an interior perspective.

The Android all-in-one monitor uses a Quadlock type connection to the W212 factory head unit, so the wiring connected to the head unit side must also be removed.

The pins on the quadlock connector wiring that was attached to the head unit are barely connected, hanging on by a thread…

If the CAN wiring in the CAN BUS communication line is cut, various ERROR warning lights will turn on in the vehicle,

and in severe cases, it may even restrict vehicle operation.

2014 Mercedes-Benz W212 E350 with removed Android all-in-one showing disconnected quadlock connector wiring and toolbox

The quadlock power CAN wiring that was connected between the Android all-in-one and the head unit has been removed for now.

Wiring work for wireless CarPlay and Android Auto SCB-NTG4.5 in 2014 Mercedes-Benz W212 E350 restoration project

Restoring with genuine parts while simultaneously installing new componentsWiring related to the wireless CarPlay & Android Auto interface SCB-NTG4.5

LVDS wiring, AV-USB wiring, Quadlock wiring, etc., are soundproofed with cloth tape.

2014 Mercedes-Benz W212 E350 wiring for wireless CarPlay SCB-NTG4.5 neatly organized with cloth tape soundproofing

Organizing the factory wiring that was previously tangled with the Android all-in-one wiring,

The SCB-NTG4.5 wiring installed along with the factory restoration was neatly organized, including the speaker wiring connected to the previously installed DSP side.

All connections and organization were done neatly.

This is the factory 7-inch monitor and monitor cover that were procured in advance.

While restoring the removed Android all-in-one slot back to factory parts, the newly installed wireless CarPlay & Android Auto interface was simultaneously installed.

It is connected to the SCB-NTG4.5 side and will display the factory-style CarPlay & Android Auto functions.


Wireless Carplay & Anroid Auto

Dashboard monitor screen of 2014 Mercedes-Benz W212 E350 restored to stock with wireless CarPlay installed

Ta-da~ This is an E350 restored to the factory cockpit using genuine parts.

It has returned to the original interior as it was at the time of the vehicle’s initial delivery.

Restored factory command controller in 2014 Mercedes-Benz W212 E350 showing wireless CarPlay switch button

If you press and hold the BACK button on the command controller, the screen switches to CarPlay or Android Auto mode.

2014 Mercedes-Benz W212 E350 showing wireless CarPlay on restored factory display

This is why they emphasize OEM ~ OEM ~. First of all, it provides peace of mind in terms of durability.

Also, the CarPlay interface SCB-NTG4.5 installed simultaneously with the OEM restoration is also OEM style, so there is no visible sign of installation on the exterior.

Both wired and wireless connections for iPhone CarPlay are supported, and the sound is output through the OEM AUX channel.

Voice recognition functions, SIRI, OK Google, and voice recognition features supported by each app are transmitted and operated through the Mercedes-Benz OEM microphone.

It helps you to conveniently search for addresses and names in apps like T map, Naver Map, and Kakao Navi.

If you are familiar with operating CarPlay or Android Auto via touch, you can add the W212 7-inch dedicated capacitive touch panel in this state,

and update the touch integration software IWTC version to also utilize the touch functionality.

For reference

Even if the hardware appears identical, interfaces without IWTC indicated in the CarPlay interface software version information cannot activate the touch function.

IWTC is a dedicated software called INDIWORK TOUCH CONTROL,

and please note that it is only compatible with the capacitive touch panels supplied by Indiwork.

Installation inquiry 010 8480 8340/ 02 2028 0296 < Mon~Fri 10:00 AM ~ 7:00 PM / Lunch break 1:00 PM ~ 2:00 PM >

Location: B201, B202 Basement, Daeryung Post Tower 3rd, 182-4 Guro 3-dong, Guro-gu, Seoul, INDIWORK

Mercedes-Benz 2016 W212 E300 Android all-in-one monitor removal and restoration to factory system & CarPlay Android Auto SCB-NTG5 installation

Mercedes-Benz C-Class Coupe C205 factory-style Android Auto & wireless CarPlay build-up!

2019 Mercedes-Benz GLC63 AMG wireless CarPlay & Android Auto touch control build-up!

2015 Mercedes-Benz S-Class W222 wireless CarPlay & Android Auto touch control!

No Comments

Post A Comment