Shop

A-LINK Android Settop Box

$386.10

A-LINK Android System
ㆍProduct Name : A-LINK (Octa Core@1.6Ghz)
ㆍRequired : A-LINK / HD-LINK Interface / Touch(Touch Panel)
(* Installable on vehicles compatible with HD-LINK interface.)
(* Vehicles without a touch system must have a touch panel.)
ㆍOption : GPS Fakra Cable / AUX generator
ㆍCan be installed with APCAST (Wireless Smartphone Mirroring)
(The A-LINK use NAVI port of HD-LINK)
(The APCAST use HDMI port of HD-LINK)
ㆍChanged each mode with genuine button & controller
ㆍSmart drive function for driver’s convenience

Faster Android system! (With. Octa Core@1.6Ghz)
New Android Settop Box, A-LINK
▶ Product Name : A-LINK
  • Settop box type DIGITAL ANDROID.
  • Optimized for each vehicle and fully interoperable.
  • Android 5.1.1 (Lollipop) NXP5430Q-64bit Cortex-A53 Octa Core@1.6Ghz Mali-400 MP4 GPU.
  • Provide the high quality 4CH digital LVDS output.
  • The digital signal is directly connected to the OEM monitor, realizing the super high definition image quality.
  • Compatible with Digital Interface and Analog RGB interface.
  • Provides unique Smart Drive system optimized for each vehicle.
  • Convenient system operated by genuine button or controller. (Quick Start App. Seek, Zoom IN / OUT)
  • Implementation of automatic emergency lighting system using CAN value of vehicle.
  • FAKRA IN/OUT cable available.(Using the Genuine GPS, DMB ports.) * Amazing reception sensitivity.*

A-LINK (Octa Core) Digital Android settop(GPS)

BY INDIWORK

Detail View

A-LINK Android Settop Box

SIZE : WIDTH – 142mm / LENGTH – 91mm / HEIGHT – 22mm

PORTS – TOP

  • POWER
  • UART I/F
  • LVDS OUT
  • RGB OUT
  • AV OUT
  • DIP SWITCH 1
  • GPS
  • WIFI

PORTS – BOTTOM

  • SD SLOT
  • DIP SWITCH 2
  • RESET / Calibration
  • Not used
  • USB 1
  • USB 2

* USB1 and USB2 port is supports external keyboard and mouse.

▲ Dip switch setting ( 2 switch)
DIP SWITCH ▼ON ▲OFF
NO.1 RGB OUT Digital LVDS OUT
NO.2 External GPS Antenna GPS Fakra (Use The Original GPS
Jack By Jack Cable (Option))

▲ Dip switch for car setting ( 4 switch)
DIP SWITCH ▼ON ▲OFF
NO.1 Capacitive Touch Resistor Touch, UART Touch
NO.2 RGB 480×234 RGB 800×480
NO.3 NC NC
NO.4 NC NC

When the Y-Type FAKRA IN / OUT CABLE is applied, the GPS reception sensitivity of the genuine car is reflected as it is.
As a result of our testing in our … You can experience the best GPS reception sensitivity regardless of the radio noise or metallic tanning film of the car.

But, Applies only to vehicles with the original navigation option.

1. Use the Capacitive Touch

* DIP SW2 : 1 (ON▼) / 2,3,4 (OFF▲)

2. Use the Resistor Touch

* DIP SW2 : 1,2,3,4 (OFF▲)

3. Use the OEM Touch

* DIP SW2 : 1,2,3,4 (OFF▲)

A-LINK(Android Settop Box) Components

1. A-LINK(Android Settop Box) Main Body

2. Wi-Fi Antenna

3. Power Cable

4. AV Cable

5. (6-PIN) Capacitive Touch Cable

6. 4-PIN Resistive Touch Cable

7. RGB Cable

8. GPS Antenna

9. External Speaker

10. MIC

11. HDMI Cable

12. USB Cable

13. Harzad Modul

Sold Separately

1. Dual GPS Fakra Cable

2. Single GPS Fakra Cable

3 DMB Fakra Cable

SPECIFICATIONS

OS Android 5.1.1 (Lollipop)
CPU NXP5430Q-64bit Cortex-A53 Octa Core@1.6Ghz Mali-400 MP4 GPU
Internal Memory 2GB DDR3 @800Mhz
NAND 16GB eMMC
USB USB2.0 High Speed Port x 2
Signal 802.11 b/g/n WiFi, Bluetooth 4.0
GPS Ublox7
Touch Resistor and Capacitive touch support
RGB OUT 800×480 or 480×234, Including RGB scaling function
LVDS OUT Digital 800×480 LVDS OUT
Speaker 2W
FM Transmitter 88.0Mhz~108.0Mhz
I/O AV IN(Only Video), Stereo Audio Out, UART(Only Smart Drive)
Voltage DC 12V ~ 24V
Temperature Storage -20 C ~ +80 C/ Operating -15 C ~ +70 C
Size 142mm(W) x 91mm(H) x 22mm(D)

Android Car Solution
New Android Settop Box
A-LINK

▶ Product Name : A-LINK

This content is copyrighted by INDIWORK and is only available to affiliates.
Weight 1000 g

Reviews

There are no reviews yet.

Be the first to review “A-LINK Android Settop Box”

Your email address will not be published. Required fields are marked *